Warning: Illegal string offset 'id' in /home/hobbysport/domains/hobbysportz.com/public_html/catalog/controller/common/header.php on line 181 KDS Flymentor 3D Auto Pilot Stabilizer System
Follow My Store
Brands
Visitor Counter
Online Now: 7
# Today: 41
# Yesterday: 105
# This Week: 146
# This Month: 30665
# This Year: 30485

KDS Flymentor 3D Auto Pilot Stabilizer System

KDS Flymentor 3D Auto Pilot Stabilizer System
Click to enlarge
Price: RM550.00
Availability: In Stock
Model: KDSFlymentor3D
Average Rating: Not Rated

There are no additional images for this product.


Automatically Hovering in a Fixed Position - KDS Flymentor 3D Stabilizing System
The KDS Flymentor 3D contain 3 components, the Flymentor Mixer, a CCD Camera and a 3-Axis Gyro. The system act as a Auto Pilot, it will only steps in when you don't give any input, but once you move your hands on the control sticks again, the system will de-activate and let you take charge again, pretty amazing, isn't it? Just like a real Auto Pilot when you need a break. The system provides 2 main features, Stabilizing Mode and Positioning Mode.

What is Stabilizing Mode?
Under this mode, there will be solid red and green light on the Flymentor Mixer, the CCD will not be working, only the 3-Axis Gyro is working. When you play the helicopter outdoor, there is wind, right? When wind pass thru the helicopter, it will push the helicopter and making it up side down, you will need to adjust the control sticks constantly to prevent this from happening. By using the Flymentor, it will automatically correct the cyclic servos and keeps the helicopter always in horizontal mode. Thanks to the 3-Axis gyro, it can work all around 360 degree correction.



What is Positioning Mode?
In this mode, there will be solid green light on the Flymentor Mixer, the CCD Camera and the 3-Axis Gyro are both working. The CCD Camera will constantly taking pictures of the ground, and compare each frame, to see if the helicopter is drifting, then it tells the Flymentor Mixer to give correction to all cyclic servos. Resulting the helicopter will stay in a Fixed position. The concept is basically an Eye watching the ground and make adjustment, kinda like a real human. But note that the system is not hooked up with the throttle, the attitude of the helicopter is still in your control.


About the Flymentor Mixer
This mixer is the brain of the whole system, it receives signal from the CCD Camera and the 3-Axis Gyro, then it commands all servos(Cyclic and Rudder Servos) to do the job. It can be placed anywhere, just far from vibration and heat.

About the CCD Camera
Used for "Positioning Mode". The CCD Camera should be mounted underneath the main shaft or on the side frame of the helicopter, with the lens pointing at the ground and free from vibration, it works best in the attitude of 1m to 3m. The CCD Camera's job is to take image of the ground, then to provide a signal to the Flymentor Mixer, and gives the correction to the cyclic servos. To have best result, make sure that there are enough "Light" and "Something" on the ground surface, like grass and gravels, because the Camera can't see very well in dim condition and it can't recognize flat snow or flat sand, it requires "Something" to see, it will not work in dim condition or low contrast color surface.

About the 3-Axis Gyro
Basically, they combine three gyros and place them on X, Y and Z axis, so it sense 3D movements now instead of rudder movement only. This gyro also contain some Temperature sensor and some other sensors too. Also, needs to isolate it from vibrate and heat.


How to install the KDS Flymentor 3D Stabilizing System?
Connect the Flymentor Mixer to the Receiver as first picture, then turn on the transmitter and choose "Swashplate Type" to 1-Servo, meaning you don't use the CCPM from your transmitter no more, you will be using the Flymentor Mixer to do the CCPM mixing, then switch off transmitter. Then connect Servos to Flymentor Mixer as second picture, and mount the CCD Camera as third picture and mount the Gyro as usual on to the helicopter, just make sure it is placed horizontally. After installing the hardware, then you install the software into the computer and use the USB cable to connect Flymentor Mixer to the computer to do the setup. From now on, all the Sub-Trims, Channel Reverse, Servo Travels.... almost everything needs be set up using the software, don't adjust the value on the transmitter anymore, except Gyro Sensitivity, it can still be adjusted thru the transmitter.


How to connect KDS Flymentor Mixer to the Receiver?


How to connect servos to the KDS Flymentor Mixer?

How to install the KDS Flymentor 3D CCD Camera on the helicopter?
To have best result, make sure that there are enough "Light" and "Something" on the ground surface, like grass and gravels, because the Camera can't see very well in dim condition and it can't recognize flat snow or flat sand, it requires "Something" to see, it will not work in dim condition or low contrast color surface.



Content of the KDS Flymentor 3D Stabilizing System


Specifications :
- Voltage: 4.8V - 6.0V
- Current: 55mA (under 5V)
- Temperature Range: 0℃ - 40℃
- Weight: 37g
- Support helicopters with 3S-120o swashplate, or 3S-140o swashplate, or 4S-90o swashplate, or 4S-90o + 45o swash plate

Download Software & Manual Link Below:

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Shopping Cart
0 items
Shipping Estimate
Country:
Region / State:
Post Code:
We Accept



Bestsellers
AR Drone 2.0 Upgrade Battery 1500mAh Dual Charging Port (compatible with AR.Drone 1.0) AR Drone 2.0 Upgrade Battery 1500mAh Dual Charging Port (compatible with AR.Drone 1.0)
RM149.00  
E-Sky Belt CP Main Gear with One Way Bearing E-Sky Belt CP Main Gear with One Way Bearing
RM35.00  
AR Drone 2.0 Gear & Shaft + Motor Pinion (Latest Version) (compatible with AR.Drone 1.0) AR Drone 2.0 Gear & Shaft + Motor Pinion (Latest Version) (compatible with AR.Drone 1.0)
RM69.00  
AR Drone 2.0 Propellers (compatible with AR.Drone 1.0) AR Drone 2.0 Propellers (compatible with AR.Drone 1.0)
RM55.00  
All in One Simulator. RealFlight G5, Phoenix V3, Reflex XTR, AeroFly & FMS Heli & Plane All in One Simulator. RealFlight G5, Phoenix V3, Reflex XTR, AeroFly & FMS Heli & Plane
RM190.00  
Parrot AR Drone 2.0 Malaysia. Support Android OS, Iphone, Ipad & Ipod 4th Gen Parrot AR Drone 2.0 Malaysia. Support Android OS, Iphone, Ipad & Ipod 4th Gen
RM0.00  
Training Kit [AKA Crash Kit Set] (Big Size) Training Kit [AKA Crash Kit Set] (Big Size)
RM25.00 RM20.00  
Tower Pro SG91R Micro High Speed Servo.For Helicopter & Airplane Tower Pro SG91R Micro High Speed Servo.For Helicopter & Airplane
RM25.00  
EK1-0404 Feathering Shaft Set EK1-0404 Feathering Shaft Set
RM25.00  
E-sky Co-Axial Durable Main Blade Set AA+BB. Upper & Lower E-sky Co-Axial Durable Main Blade Set AA+BB. Upper & Lower
RM25.00  
E-sky Co-Axial Durable Main Blade Set AA+BB. Upper & Lower E-sky Co-Axial Durable Main Blade Set AA+BB. Upper & Lower
RM25.00  
E-Sky Belt CP Wooden Main Blade E-Sky Belt CP Wooden Main Blade
RM35.00  
E-Sky Lama V4, Now with Free Simulator!!..FM 4CH Electric RC Helicopter E-Sky Lama V4, Now with Free Simulator!!..FM 4CH Electric RC Helicopter
RM365.00 RM250.00  
T-Rex 450SE V2/CopterX 450SE V2 Wooden Main Rotor Blade 325mm. T-Rex 450SE V2/CopterX 450SE V2 Wooden Main Rotor Blade 325mm.
RM30.00 RM25.00  
E-Sky Belt CP Main Gear with One Way Bearing E-Sky Belt CP Main Gear with One Way Bearing
RM35.00  
G.E.Li-Poly Battery 7.4v 860mah 20C. Best for Co-Axial Heli! G.E.Li-Poly Battery 7.4v 860mah 20C. Best for Co-Axial Heli!
RM60.00  
E-Fly 11.1v 2300mah 45C, Suitable for Helicopter & Plane E-Fly 11.1v 2300mah 45C, Suitable for Helicopter & Plane
RM150.00 RM99.00  
DJI Phantom 2 Vision+ Aluminium Case (Store without Removing Propeller) DJI Phantom 2 Vision+ Aluminium Case (Store without Removing Propeller)
RM380.00  
T-Rex 450SE V2/CopterX 450SE V2 Feathering Shaft V2 Set T-Rex 450SE V2/CopterX 450SE V2 Feathering Shaft V2 Set
RM15.00  
AR Drone 2.0 GPS Flight Recorder built in 4GB Flash Memory AR Drone 2.0 GPS Flight Recorder built in 4GB Flash Memory
RM380.00  
AR Drone 2.0 Tool Set (compatible with AR.Drone 1.0) AR Drone 2.0 Tool Set (compatible with AR.Drone 1.0)
RM55.00  
Parrot MiniDrone Rolling Spider Parrot MiniDrone Rolling Spider
RM0.00  
AR Drone 2.0 Upgrade Motor Shaft Ball Bearing (compatible with AR.Drone 1.0) AR Drone 2.0 Upgrade Motor Shaft Ball Bearing (compatible with AR.Drone 1.0)
RM45.00  
DJI Phantom 2 Vision built In 1080p Camera + GPS Drone (RTF) w/ Free Extra Battery DJI Phantom 2 Vision built In 1080p Camera + GPS Drone (RTF) w/ Free Extra Battery
RM0.00  
T-Rex 450SE V2/CopterX 450SE V2 Flybar Rod/220mm T-Rex 450SE V2/CopterX 450SE V2 Flybar Rod/220mm
RM15.00  
E-Sky USB Softdog Flight Simulator Cable + FMS Software CD E-Sky USB Softdog Flight Simulator Cable + FMS Software CD
RM28.00  
Pinion with screw for Brushless Motor ( 3.17mm 11T, 12T, 13T, 14T ) Pinion with screw for Brushless Motor ( 3.17mm 11T, 12T, 13T, 14T )
RM15.00  
9450 Plastic Propellers for DJI Phantom 3 / Phantom 2 Vision+ (Self-Tightened / CW & CCW) 9450 Plastic Propellers for DJI Phantom 3 / Phantom 2 Vision+ (Self-Tightened / CW & CCW)
RM45.00  
E-Sky Belt-CP V2 RTF 2.4Ghz Edition Helicopter E-Sky Belt-CP V2 RTF 2.4Ghz Edition Helicopter
RM550.00  
DJI Phantom 2 Vision+ (V3.0 New Version) + 3axis Gimbal + 1080p Camera with 2pcs Battery (RTF) DJI Phantom 2 Vision+ (V3.0 New Version) + 3axis Gimbal + 1080p Camera with 2pcs Battery (RTF)
RM0.00