Warning: Illegal string offset 'id' in /home/hobbysport/domains/hobbysportz.com/public_html/catalog/controller/common/header.php on line 181 DJI Spark. Smallest DJI drone with Full HD Camera. TapFly, Active Track, Gesture Control
Follow My Store
Brands
Visitor Counter
Online Now: 5
# Today: 68
# Yesterday: 135
# This Week: 203
# This Month: 34947
# This Year: 40829

DJI Spark. Smallest DJI drone with Full HD Camera. TapFly, Active Track, Gesture Control

DJI Spark. Smallest DJI drone with Full HD Camera. TapFly, Active Track, Gesture Control
Click to enlarge
Price: RM2,350.00 RM2,250.00
Availability: In Stock
Model: DJISPARK
Manufacturer: DJI Innovations
Average Rating: Not Rated

There are no additional images for this product.

Spark is a mini drone that features all of DJI's signature technologies, allowing you to seize the moment whenever you feel inspired.

Aircraft

Takeoff Weight 300 g
Dimensions 143×143×55 mm
Diagonal Distance (propellers excluded) 170 mm
Max Ascent Speed 9.8 ft/s (3 m/s) in Sport Mode without wind
Max Descent Speed 9.8 ft/s (3 m/s) in Auto Landing Mode
Max Speed 31 mph (50 kph) in Sport Mode without wind
Max Service Ceiling Above Sea Level 13,123 feet (4,000 m)
Max Flight Time 16 minutes (no wind at a consistent 12.4 mph (20 kph))
Max Hovering Time 15 minutes (no wind)
Operating Temperature Range 32° to 104° F (0° to 40° C)
Satellite Positioning Systems GPS/GLONASS
Hover Accuracy Range Vertical:
+/- 0.1 m (when Vision Positioning is active) or +/-0.5 m
Horizontal:
+/- 0.3 m (when Vision Positioning is active) or +/-1.5 m
Transmitter Power (EIRP) 2.4 GHz
FCC: 25 dBm; CE: 18 dBm; SRRC: 18 dBm
5.8 GHz
FCC: 27 dBm; CE: 14 dBm; SRRC: 27 dBm
Operating Frequency 2.400 - 2.483 GHz; 5.725 - 5.825 GHz

3D Sensing system

Obstacle Sensing Range 1-16 ft (0.2 - 5 m)
Operating Environment Detects diffuse reflective surfaces (>20%) larger than 20x20 cm (walls, trees, people, etc.)

Camera

Sensor 1/2.3" CMOS
Effective pixels: 12 MP
Lens FOV 81.9° 25 mm (35 mm format equivalent) f/2.6
(shooting range: 2 m to ∞)
ISO Range Video: 100-3200
Photo: 100-1600
Electronic Shutter Speed 2-1/8000 s
Image Size 3968×2976
Still Photography Modes Single Shot
Burst Shooting: 3 frames
Auto Exposure Bracketing (AEB): 3 bracketed frames at 0.7 EV bias
Interval: 2/3/5/7/10/15/20/30/60 s
Video Resolution FHD: 1920×1080 30p
Max Video Bitrate 24 Mbps
Supported File Systems FAT32
Photo Format JPEG
Video Format MP4 (MPEG-4 AVC/H.264)

Remote Controller

Operating Frequency 2.412-2.462 GHz; 5.745-5.825 GHz
Max Transmission Distance 2.412 - 2.462 GHz (unobstructed, free of interference)
FCC: 1.2 mi (2 km); CE: 0.3 mi (500 m); SRRC: 0.3 mi (500 m)
5.745 - 5.825 GHz (unobstructed, free of interference)
FCC: 1.2 mi (2 km); CE: 0.18 mi (300 m); SRRC: 0.7 mi (1.2 km)
Operating Temperature Range 32° to 104° F (0° to 40° C)
Battery 2970 mAh
Transmitter Power (EIRP) 2.4 GHz
FCC: ≤26 dBm; CE: ≤18 dBm; SRCC: ≤18 dBm
5.8 GHz
FCC: ≤28 dBm; CE: ≤14 dBm; SRCC: ≤26 dBm
Operating Current/Voltage 950 mAh @3.7 V
Supported Mobile Device Size Thickness range: 6.5-8.5 mm
Max length: 160 mm

Intelligent Flight Battery

Capacity 1480 mAh
Voltage 11.4 V
Max Charging Voltage 13.05 V
Battery Type LiPo 3S
Energy 16.87 Wh
Net Weight Approx. 0.2 lbs (95 g)
Charging Temperature Range 41° to 104° F (5° to 40° C)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 















 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PRODUCT

What are the main differences between Spark and Mavic?

Spark is smaller and lighter than the Mavic Pro, but also supports all of the Mavic Pro’s Intelligent Flight Modes. Spark also introduces new features like QuickShot and advanced gesture controls like PalmControl.

How do I control Spark?

Control Spark with your mobile device by downloading the DJI GO 4 app or use the remote controller.

How do I activate Spark?

There are two ways to activate Spark:
a. Connect Spark with your mobile device and follow the instructions in DJI GO 4 to complete activation.
b. Tap the top right icon in DJI GO 4’s main page, choose Scan QR Code, and use your mobile device’s camera to scan the QR code in the aircraft’s battery compartment. Follow the instructions in the app to complete activation.

What are the recommended Micro SD cards for Spark?

Sandisk 16 GB UHS-1 Micro SDHC
Sandisk 32 GB UHS-1 Micro SDHC
Sandisk 64 GB UHS-1 Micro SDXC
Kingston 16 GB UHS-1 Micro SDHC
Kingston 32 GB UHS-1 Micro SDHC
Kingston 64 GB UHS-1 Micro SDXC
Samsung 16GB UHS-I Micro SDHC
Samsung 32GB UHS-I Micro SDHC
Samsung 64GB UHS-I Micro SDXC

Is Spark waterproof?

No. It is recommended to avoid flying Spark in rain, fog, snow, or wet weather. Also avoid landing in or taking off from puddles, as the chassis is close to the ground.

CAMERA

What new functions does Spark’s camera have?

Spark supports ShallowFocus and Pano modes, which includes Horizontal and Vertical modes.

What is ShallowFocus?

ShallowFocus creates photos with a shallow depth of field with its 3D vision technology.

Which Pano modes are available?

Vertical Mode: The camera will capture three photos vertically, then combine them to make a vertical panorama.
Horizontal Mode: The camera will take nine photos from different angles vertically and horizontally, then combine them to make a horizontal panorama.

Can I capture photos or record video without a Micro SD card?

Yes, you can. The aircraft will store photos and videos on your mobile device. In this instance, the images captured are actually from the live stream with a photo resolution of 1024×768 and video resolution of 1280×720.

Vision

What is the maximum distance and speed at which Spark can sense obstacles?

Spark will automatically avoid obstacles up to 16 ft (5 m) in front of it. The maximum speed at which Spark is able to sense obstacles is 3 m/s.

What new Intelligent Flight Modes does Spark include?

Spark is the first DJI drone to feature new TapFly submodes, Coordinate and Direction.
In QuickShot mode, Spark takes professional shots for you with Rocket, Dronie, Circle, and Helix.
Spark’s Gesture Mode also includes a new set of advanced gesture recognition capabilities, including PalmControl, Follow, Beckon, and PalmLand.

Remote Controller

What mobile device sizes fit inside Spark’s remote controller?

Spark’s remote controller fits mobile devices 6.5‑8.5 mm thick and up to 160 mm long, without a phone case. Mobile devices larger than this do not fit the remote controller’s device holder.

How do I update the remote controller firmware?

The remote controller firmware can be updated in DJI GO 4.

How long does it take to fully charge the remote controller? How long is the battery life?

It takes 2 hours to fully charge the remote controller for up to 2.5 hours of operation.

How do I link Spark to the remote controller?

Press the Pause, Fn, and C1 buttons at the same time. Once the controller starts beeping, release these buttons. With Spark powered on, press and hold the battery power button. When you hear Spark beep, release this button. Linking is now complete.

What Wi-Fi frequencies does the remote controller support?

The remote controller supports 2.4 GHz and 5.8 GHz dual‑band Wi‑Fi frequencies.

What are the dimensions of the remote controller?

The remote controller is approximately 15 cm long, 8 cm high, and 6 cm thick.

Propulsion

Do I have to remove the propellers when storing or transporting Spark?

No. Just fold the propellers.

What happens if the propellers are not fully unfolded before flight?

Once the rotors start spinning, centrifugal force will automatically unfold the propellers into the correct position.

Spark’s motors are not all on the same plane. Will this affect flight performance?

No. Each motor sits at a 5° angle for optimal flight performance.

What wind speeds can Spark resist?

Spark can withstand wind speeds between 13‑18 mph (20‑28 kph).

Video Transmission

What’s the resolution of Spark’s video transmission?

720p 30 fps.

What’s the latency of Spark’s video transmission?

The video transmission latency to your mobile device is about 200 ms. It is subject to the performance of your mobile device and signal interference.

What is Spark’s effective transmission range?

When connected to a remote controller:
2.4 GHz
FCC: 1.2 mi (2 km); CE: 0.3 mi (500 m); SRRC: 0.3 mi (500 m) (unobstructed and free of interference)
5.8 GHz
FCC: 1.2 mi (2 km); CE: 0.18 mi (300 m); SRRC: 0.7 mi (1.2 km) (unobstructed and free of interference)
When connected directly to a mobile device:
A max height of 50 m and distance of 100 m.

Can frequency bands be manually adjusted during video transmission?

Yes. Users can manually choose between 2.4 GHz and 5.8 GHz or let DJI GO 4 choose a frequency band automatically.

Where can I check the aircraft Wi-Fi’s username and password?

There are three places where you can check this information: a. The battery compartment on the aircraft (only the default Wi-Fi username and password can be found here);
b. The Settings option in DJI Assistant 2 or DJI GO 4;
c. The foam outer box (only the default Wi-Fi username and password can be found here).

How do I reset or modify Spark’s Wi-Fi username and password?

To reset, hold the power button down for 9 seconds until you hear the aircraft beep three times.

 To modify, connect your mobile device to Spark, enter the DJI GO 4 app, and modify the Wi-Fi username and password in the Connection Help Menu.

(Note: If Spark is connected with DJI Assistant 2 on a computer, restart the aircraft before resetting the Wi-Fi username and password.)


My mobile device does not detect Spark’s Wi-Fi when I turn it on. What should I do?

This may be because Spark was previously connected to the remote controller. To prompt detection, power on the aircraft, then press down on the power button for six seconds until you hear the aircraft beep twice. This indicates that Spark’s Wi-Fi is now detectable on your mobile device.

Battery

How do I charge Spark?

Use the included USB cable to charge Spark. During charging, do not remove the battery from the aircraft.
Use the Charging Hub to charge three batteries simultaneously. If using the Charging Hub, you will need to remove the batteries from the aircraft and place them in the Charging Hub.

My newly purchased battery is not responding when I press the power button. What should I do?

New batteries are shipped in Hibernation Mode. In order to activate your newly purchased battery, charge it fully.

How long does it take to fully charge a battery?

When using a standard USB charger, it takes 80 minutes to fully charge a battery.
When using a Charging Hub, it takes 52 minutes to fully charge one battery, 55 minutes when charging two batteries and 85.2 minutes when charging three batteries at the same time.

How often should I fully charge my Spark batteries?

It is recommended to fully charge Spark batteries at least once every three months.

When does a battery enter Hibernation Mode?

When a battery is less than 10% charged, it will enter Hibernation Mode after approximately six hours of nonuse.
When a battery is completely drained, it will enter Hibernation Mode within 10 minutes of turning off.

What functions can the power button perform?

a. Turning the battery on and off: Press the power button once, and then press again and hold it down for at least two seconds to turn the battery on or off.
b. Checking the current battery level: Press the power button once to check the current battery level.
c. Linking Spark and the remote controller: Hold down on Spark’s power button for three seconds, and release on hearing a beep. Spark’s front indicators will start to flash in red, signifying Spark and the remote controller have been linked.
d. Delinking Spark and the remote controller: In order to use your mobile device to control Spark, you will need to delink the aircraft and remote controller. Power on Spark, and hold down on Spark’s power button for six seconds until you hear it beep twice. Now Spark and the remote controller have successfully been delinked and you can search for Spark’s Wi-Fi on your mobile device.
e. Resetting Spark’s Wi-Fi username and password: Hold down on the power button for nine seconds, and release after hearing it beep three times. Your Wi-Fi settings will be reset to the factory default.
f. PalmLaunch: Power on Spark and place it on your palm with the camera facing you. Make sure your fingers are lower than Spark’s arms. Press the power button twice when the flight indicators start to flash green. The indicators will change to a slowly flashing yellow, and FaceAware will begin to recognize your face. The front indicators will turn to green if detection is successful, and PalmLaunch will be activated. If not, the indicators will flash red.

What can I do with the two USB ports on the Charging Hub?

You can charge two mobile devices or your Spark.

Updating Firmware

Can I use other apps while DJI GO 4 is updating?

No. If you do, the update will fail. You will then need to download the firmware and update again.

Why does DJI GO 4 remind me to reconnect to Spark’s Wi-Fi right before it restarts to complete the update?

Before the update is complete, Spark will need to restart. Once it does, reconnect your mobile device to Spark’s Wi-Fi. DJI GO 4 is just reminding you that you will need to do this for a successful update.

Can I disconnect from the internet once the firmware is downloaded successfully?

Yes.

If the aircraft or the remote controller battery levels drop below 50% during an update, will the update fail?

No, but it is recommended that both have a high level of battery charge during the update.

What should I do if the aircraft and battery firmware versions are inconsistent?

Connect Spark to DJI GO 4, and the app will inform you of appropriate updates to ensure consistency.

What should I do if the update is really slow?

Please wait patiently and do not operate Spark or the remote controller during the update. Usually, it takes two minutes to update the remote controller and five minutes to update Spark. If the update process is taking much longer, please check your internet connection or move to a different environment. You could also restart Spark and the remote controller to begin the update again.

What factors could lead to an update failure?

a. Low battery level. Make sure the battery level is higher than 50%.
b. Powering off Spark or the remote controller during the update. If this happens, please restart Spark/remote controller and begin the update again.
c. Internet disconnection when downloading firmware.
d.Aircraft and remote controller firmware version inconsistency. Use DJI GO 4 to update the aircraft and remote controller to the latest version.


 It is recommended that you use DJI Assistant 2 on your computer to update your aircraft.

Please note that Spark will restart once the update finishes

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Shopping Cart
0 items
Shipping Estimate
Country:
Region / State:
Post Code:
We Accept



Bestsellers
AR Drone 2.0 Upgrade Battery 1500mAh Dual Charging Port (compatible with AR.Drone 1.0) AR Drone 2.0 Upgrade Battery 1500mAh Dual Charging Port (compatible with AR.Drone 1.0)
RM149.00  
E-Sky Belt CP Main Gear with One Way Bearing E-Sky Belt CP Main Gear with One Way Bearing
RM35.00  
AR Drone 2.0 Gear & Shaft + Motor Pinion (Latest Version) (compatible with AR.Drone 1.0) AR Drone 2.0 Gear & Shaft + Motor Pinion (Latest Version) (compatible with AR.Drone 1.0)
RM69.00  
AR Drone 2.0 Propellers (compatible with AR.Drone 1.0) AR Drone 2.0 Propellers (compatible with AR.Drone 1.0)
RM55.00  
All in One Simulator. RealFlight G5, Phoenix V3, Reflex XTR, AeroFly & FMS Heli & Plane All in One Simulator. RealFlight G5, Phoenix V3, Reflex XTR, AeroFly & FMS Heli & Plane
RM190.00  
Parrot AR Drone 2.0 Malaysia. Support Android OS, Iphone, Ipad & Ipod 4th Gen Parrot AR Drone 2.0 Malaysia. Support Android OS, Iphone, Ipad & Ipod 4th Gen
RM0.00  
Training Kit [AKA Crash Kit Set] (Big Size) Training Kit [AKA Crash Kit Set] (Big Size)
RM25.00 RM20.00  
Tower Pro SG91R Micro High Speed Servo.For Helicopter & Airplane Tower Pro SG91R Micro High Speed Servo.For Helicopter & Airplane
RM25.00  
EK1-0404 Feathering Shaft Set EK1-0404 Feathering Shaft Set
RM25.00  
E-sky Co-Axial Durable Main Blade Set AA+BB. Upper & Lower E-sky Co-Axial Durable Main Blade Set AA+BB. Upper & Lower
RM25.00  
E-sky Co-Axial Durable Main Blade Set AA+BB. Upper & Lower E-sky Co-Axial Durable Main Blade Set AA+BB. Upper & Lower
RM25.00  
E-Sky Belt CP Wooden Main Blade E-Sky Belt CP Wooden Main Blade
RM35.00  
E-Sky Lama V4, Now with Free Simulator!!..FM 4CH Electric RC Helicopter E-Sky Lama V4, Now with Free Simulator!!..FM 4CH Electric RC Helicopter
RM365.00 RM250.00  
T-Rex 450SE V2/CopterX 450SE V2 Wooden Main Rotor Blade 325mm. T-Rex 450SE V2/CopterX 450SE V2 Wooden Main Rotor Blade 325mm.
RM30.00 RM25.00  
E-Sky Belt CP Main Gear with One Way Bearing E-Sky Belt CP Main Gear with One Way Bearing
RM35.00  
G.E.Li-Poly Battery 7.4v 860mah 20C. Best for Co-Axial Heli! G.E.Li-Poly Battery 7.4v 860mah 20C. Best for Co-Axial Heli!
RM60.00  
E-Fly 11.1v 2300mah 45C, Suitable for Helicopter & Plane E-Fly 11.1v 2300mah 45C, Suitable for Helicopter & Plane
RM150.00 RM99.00  
DJI Phantom 2 Vision+ Aluminium Case (Store without Removing Propeller) DJI Phantom 2 Vision+ Aluminium Case (Store without Removing Propeller)
RM380.00  
T-Rex 450SE V2/CopterX 450SE V2 Feathering Shaft V2 Set T-Rex 450SE V2/CopterX 450SE V2 Feathering Shaft V2 Set
RM15.00  
AR Drone 2.0 GPS Flight Recorder built in 4GB Flash Memory AR Drone 2.0 GPS Flight Recorder built in 4GB Flash Memory
RM380.00  
AR Drone 2.0 Tool Set (compatible with AR.Drone 1.0) AR Drone 2.0 Tool Set (compatible with AR.Drone 1.0)
RM55.00  
Parrot MiniDrone Rolling Spider Parrot MiniDrone Rolling Spider
RM0.00  
AR Drone 2.0 Upgrade Motor Shaft Ball Bearing (compatible with AR.Drone 1.0) AR Drone 2.0 Upgrade Motor Shaft Ball Bearing (compatible with AR.Drone 1.0)
RM45.00  
DJI Phantom 2 Vision built In 1080p Camera + GPS Drone (RTF) w/ Free Extra Battery DJI Phantom 2 Vision built In 1080p Camera + GPS Drone (RTF) w/ Free Extra Battery
RM0.00  
T-Rex 450SE V2/CopterX 450SE V2 Flybar Rod/220mm T-Rex 450SE V2/CopterX 450SE V2 Flybar Rod/220mm
RM15.00  
E-Sky USB Softdog Flight Simulator Cable + FMS Software CD E-Sky USB Softdog Flight Simulator Cable + FMS Software CD
RM28.00  
Pinion with screw for Brushless Motor ( 3.17mm 11T, 12T, 13T, 14T ) Pinion with screw for Brushless Motor ( 3.17mm 11T, 12T, 13T, 14T )
RM15.00  
9450 Plastic Propellers for DJI Phantom 3 / Phantom 2 Vision+ (Self-Tightened / CW & CCW) 9450 Plastic Propellers for DJI Phantom 3 / Phantom 2 Vision+ (Self-Tightened / CW & CCW)
RM45.00  
E-Sky Belt-CP V2 RTF 2.4Ghz Edition Helicopter E-Sky Belt-CP V2 RTF 2.4Ghz Edition Helicopter
RM550.00  
DJI Phantom 2 Vision+ (V3.0 New Version) + 3axis Gimbal + 1080p Camera with 2pcs Battery (RTF) DJI Phantom 2 Vision+ (V3.0 New Version) + 3axis Gimbal + 1080p Camera with 2pcs Battery (RTF)
RM0.00